Nitro ION Miner

The Nitro ION miner encapsulates all that we have been creating. Based on a simple yet powerful concept, this indoor miner is very easy to set up and is the gateway for effortless earning from anywhere in the world! All that you need to set it up is a small unused space in your home/office or just any place, a good WiFi connection and power supply. And you are ON! Once the ION miner is connected to your Wifi and your account is linked and verified you begin earning. Incidentally, the ION miner supports major global frequencies, so rest assured it works just fine from anywhere!

Technical Specifications:

• LoRa Spec:

  • 1 x SX1308 + 2 x 1257 LoRa Transceiver

• General Specification:

  • 10M/100M RJ45 Ports x 1

  • 1 x 2.4G WiFi (802.11 bgn)

  • 1 x USB host port

  • Power Input via USB Type-C: 5V, 2A

• Specifications

  • Hardware System:

    • Linux Part:

    • 400Mhz ar9331 processor

    • 64MB RAM

    • 16MB Flash

  • Interface

    • 10M/100M RJ45 Ports x 1

    • WiFi : 802.11 b/g/n

    • LoRaWAN Wireless

    • Power Input: 5V DC, 2A, Type C

    • USB 2.0 host connector x 1

  • Wifi Spec:

    • IEEE 802.11 b/g/n

    • Frequency Band: 2.4 ~ 2.462GHz

  • Tx power:

    • 11n tx power : mcs7/15: 11db mcs0 : 17db

    • 11b tx power: 18db

    • 11g 54M tx power: 12db

    • 11g 6M tx power: 18db

  • Wifi Sensitivity:

    • 11g 54M : -71dbm

    • 11n 20M : -67dbm

  • LoRa Spec:

    • Up to -140 dBm sensitivity with SX1257 Tx/Rx front-end

    • 70 dB CW interferer rejection at 1 MHz offset

    • Able to operate with negative SNR, CCR up to 9dB

    • Emulates 49 x LoRa demodulators and 1 x (G)FSK demodulator

    • Dual digital TX & RX radio front-end interfaces

    • 10 programmable parallel demodulation paths

    • Dynamic data-rate (DDR) adaptation

    • True antenna diversity or simultaneous dual-band operation

  • Max Power: 5v, 1.3A